Water Disinfection
Water Disinfection – UET-D-GO
UET’s system to combat bacterial contamination in water systems involves activating the natural elements in water in situ to produce biocides and eliminate bacteria without adding chemicals.
Natural Biocide
As water passes through the disinfection unit, DC voltage applied to electrodes in its chambers cause partial electrolysis of the water. This unique electro-chemical process creates natural biocides which have a proven disinfection effect on the water. It has been shown to successfully eliminate legionella, salmonella, pseudomonas and other bio-contaminants. The system’s integrated chlorine controller controls the disinfection effect at the level required.
Product Detail
Disinfects water supply without the use of chemical additives.
- Removes the need for chemical related logistics and storage hazards.
- Maintains a constant and controlled chlorine level.
- Safe and environmentally friendly control of bio-contaminants.
- Reduces overall costs for water system operation.
Controller indicates setpoint and actual chlorine level.
- Factory pre-wired and pre-plumbed system for easy installation.
- Easy maintenance and replacement of parts.
- System pressure and flow rate according to design.
Recommended operating pressure – 3 bar.
- Operating temperature - 10 to 60 0C.
- 110/220 VAC 1/3 phase power, protection 16A.
- Suitable for water at minimum conductivity of 100 ms/cm.
- Full one year warranty from date of purchase
Typical Water Analysis
| Parameter | Units | Feed water | Treated Water |
|---|---|---|---|
| Conductivity | µS/cm | 200-800 | 200-800 |
| Ph | Units | 6.0-7.5 | 6.0-7.5 |
| Total hardness | PPM | 20-175 | 20-175 |
| Fe | PPM | 0-0.3 | 0.1-0.5 |
| Cl2 | PPM | 0 | 0.1-3.0 |
